Hybrid fluting test
Author:moao Time:2021-08-20 19:07:57
1. Test tool specifications: integral HM twist drill D10.1*61*103*SD10.
2: Test grinding wheel specifications: strength slotted grinding wheel 1A1-125-10-10-D64
3: Test machine: ANCA TX7+
4. Test data:
Grinding wheel speed: 2800RPM(18M/S)
|
|
First cut |
Second cut |
|
Grinding depth |
3.5mm |
0.03mm |
|
Feed |
80mm/min |
200mm/min |
|
First groove processing time |
1min12s |
30 sec |
|
Second groove processing time |
1min12 s |
30 s |
|
Grooving Processing time |
3min 24 s |
|
|
Number of processing |
Load |
Processing time |
|
1 |
8% |
3min 24 s
Change is very small |
|
2 |
9% |
|
|
3 |
12% |
|
|
4 |
10% |
|
|
5 |
15% |
|
|
6 |
20% |
|
|
7 |
25% |
|
|
|
Oil stone
|
|
|
8 |
7% |
|
|
9 |
9% |
|
|
10 |
13% |
|
|
11 |
18% |
|
|
12 |
23% |
|
|
|
Oil stone
|
Comprehensive analysis:
A total of 100 units were tested. The first 7 units were tested to the limit. The maximum load of the machine was set at 25%.
After the sharpening, the load of the machine tool can be reduced, the grinding force of the grinding wheel can be maintained, and the outer diameter of the grinding wheel does not change much. In conclusion, the hardness of the grinding wheel is hard, the grinding wheel is easy to block holes, and the grinding wheel maintainability is good.
TAG: Hybrid fluting test integral HM twist drill grinding wheel